AIDA DSF-M2-12500

The AIDA DSF-M2, straightside tie-rod frame servo press manufactured in AIDA-America's 180,000 sq. ft. factory in Dayton, OH, is available from 315 through 1,250 tons capacity. Configurations include single or double reduction eccentric gear drive, 1/4" and 1/2" rating points, a wide variety of stroke length and die height choices as well as zero clearance roller-type slide guides (with bronze oil film guides as an option). The DSF-M2, like all AIDA Direct Drive Servo Formers (DSF Series), includes the AIDA designed and manufactured direct drive high torque, low RPM servo motor specifically designed for stamping press applications. Full Stroke Length : Single Reduction: 15.7 in. (400 mm); Double Reduction: 15.7, 19.7, or 23.6 in. (400, 500, or 600 mm) Rating Point : Single Reduction 400 mm: 0.50 in. at 24 spm, 0.33 in. at 30 spm; Double Reduction 400 mm: 0.46 in. at 22 spm, 0.28 in. at 30 spm Slide and Bolster Area : Single Reduction: 167.3 x 70.9, 190.9 x 70.9, or 240.2 x 70.9 in. (4250 x 1800, 4850 x 1800, or 6100 x 1800 mm); Double Reduction: 190.9 x 70.9 or 240.2 x 70.9 in. (4850 x 1800 or 6100 x 1800 mm) Strokes per Minute : Full Stroke: 1 to 45 spm (Single Reduction), 1 to 30 spm (Double Reduction); Pendulum Stroke Single/Double: 200 mm - 1 to 48/1 to 35 spm, 150 mm - 1 to 50/1 to 40 spm, 100 mm - 1 to 53/1 to 45 spm; Micro-inch: 1.0, 0.1, or 0.01 degree selectable Working Energy (Standard, Full Stroke) : Single Reduction: 1,035 in-U.S. ton at 45 spm, 1,809 in-U.S. ton at 15 spm (227 kJ at 45 spm, 409 kJ at 15 spm); Double Reduction: 973 in-U.S. ton at 30 spm, 1,593 in-U.S. ton at 15 spm (220 kJ at 30 spm, 360 kJ at 15 spm)