AIDA DSF-M2-10000

The AIDA DSF-M2, straightside tie-rod frame servo press manufactured in AIDA-America's 180,000 sq. ft. factory in Dayton, OH, is available from 315 through 1,250 tons capacity. Configurations include single or double reduction eccentric gear drive, 1/4" and 1/2" rating points, a wide variety of stroke length and die height choices as well as zero clearance roller-type slide guides (with bronze oil film guides as an option). The DSF-M2, like all AIDA Direct Drive Servo Formers (DSF Series), includes the AIDA designed and manufactured direct drive high torque, low RPM servo motor specifically designed for stamping press applications. Full Stroke Length : Single Reduction: 13.8, 15.7, or 19.7 in. (350, 400, or 500 mm); Double Reduction: 21.7 or 23.6 in. (550 or 600 mm) Rating Point : Single Reduction 350 mm: 0.43 in. at 25 spm, 0.28 in. at 30 spm; 400 mm: 0.39 in. at 25 spm, 0.25 in. at 30 spm; 500 mm: 0.35 in. at 25 spm, 0.22 in. at 30 spm Strokes per Minute : Full Stroke: 1 to 50 spm (Single Reduction), 1 to 30 spm (Double Reduction); Pendulum Stroke (Double Reduction): 200 mm - 1 to 35 spm, 150 mm - 1 to 40 spm, 100 mm - 1 to 44 spm, 75 mm - 1 to 47 spm; Micro-inch: 1.0, 0.1, or 0.01 degree selectable Working Energy (Standard, Full Stroke) : Single Reduction: 620 in-U.S. ton at 50 spm, 1,283 in-U.S. ton at 20 spm (140 kJ at 50 spm, 290 kJ at 20 spm); Double Reduction: 1,106 in-U.S. ton at 30 spm, 1,770 in-U.S. ton at 10 spm (250 kJ at 30 spm, 400 kJ at 10 spm)