AIDA DSF-M2-6300

The AIDA DSF-M2, straightside tie-rod frame servo press manufactured in AIDA-America's 180,000 sq. ft. factory in Dayton, OH, is available from 315 through 1,250 tons capacity. Configurations include single or double reduction eccentric gear drive, 1/4" and 1/2" rating points, a wide variety of stroke length and die height choices as well as zero clearance roller-type slide guides (with bronze oil film guides as an option). The DSF-M2, like all AIDA Direct Drive Servo Formers (DSF Series), includes the AIDA designed and manufactured direct drive high torque, low RPM servo motor specifically designed for stamping press applications. Full Stroke Length : Single Reduction: 11.8, 13.8, or 15.7 in. (300, 350, or 400 mm); Double Reduction: 15.7 or 17.7 in. (400 or 450 mm), Optional 19.7 in. (500 mm) Rating Point : Single Reduction 300 mm: 0.50 in. at 30 spm; 350 mm: 0.31 in. at 35 spm; 400 mm: 0.50 in. at 25 spm; Double Reduction 400 mm: 0.28 in. at 35 spm; Optional 450 mm: 0.43 in. at 25 spm; Optional 500 mm: 0.25 in. at 35 spm Strokes per Minute : Full Stroke: 1 to 60 spm (Single Reduction), 1 to 35 spm (Double Reduction); Pendulum Stroke Single/Double: 150 mm - 1 to 67/1 to 40 spm, 125 mm - 1 to 73/1 to 45 spm, 100 mm - 1 to 80/1 to 50 spm, 75 mm - 1 to 90/1 to 55 spm, 60 mm - 1 to 100/1 to 58 spm; Micro-inch: 1.0, 0.1, or 0.01 degree selectable Working Energy (Standard, Full Stroke) : Single Reduction: 265 in-U.S. ton at 60 spm, 420 in-U.S. ton at 50 spm, 796 in-U.S. ton at 20 spm (60 kJ at 60 spm, 95 kJ at 50 spm, 180 kJ at 20 spm); Double Reduction: 465 in-U.S. ton at 35 spm, 774 in-U.S. ton at 15 spm (105 kJ at 35 spm, 175 kJ at 15 spm)