AIDA DSF-M2-4000

The AIDA DSF-M2, straightside tie-rod frame servo press manufactured in AIDA-America's 180,000 sq. ft. factory in Dayton, OH, is available from 315 through 1,250 tons capacity. Configurations include single or double reduction eccentric gear drive, 1/4" and 1/2" rating points, a wide variety of stroke length and die height choices as well as zero clearance roller-type slide guides (with bronze oil film guides as an option). The DSF-M2, like all AIDA Direct Drive Servo Formers (DSF Series), includes the AIDA designed and manufactured direct drive high torque, low RPM servo motor specifically designed for stamping press applications. Full Stroke Length : Single Reduction: 9.8, 11.8, or 13.8 in. (250, 300, or 350 mm); Double Reduction: 11.8 or 13.8 in. (300 or 350 mm) Rating Point : Single Reduction 250 mm: 0.50 in. at 35 spm; 300 mm: 0.50 in. at 32 spm; 350 mm: 0.41 in. at 35 spm; Double Reduction 300 mm: 0.50 in. at 31 spm; 350 mm: 0.37 in. at 35 spm Strokes per Minute : Full Stroke: 1 to 65 spm (Single Reduction), 1 to 35 spm (Double Reduction); Pendulum Stroke Single/Double: 150 mm - 1 to 83/1 to 55 spm, 125 mm - 1 to 90/1 to 60 spm, 100 mm - 1 to 100/1 to 65 spm, 75 mm - 1 to 110/1 to 70 spm, 60 mm - 1 to 120/1 to 75 spm; Micro-inch: 1.0, 0.1, or 0.01 degree selectable Working Energy (Standard, Full Stroke) : Single Reduction: 265 in-U.S. ton at 65 spm, 664 in-U.S. ton at 20 spm (60 kJ at 65 spm, 150 kJ at 20 spm); Double Reduction: 487 in-U.S. ton at 35 spm, 708 in-U.S. ton at 15 spm (110 kJ at 35 spm, 160 kJ at 15 spm)