AIDA DSF-N2-3000
AIDA DSF-N2-3000
Location:Blairsville, GA
or
Call 937-631-6016
Description
STANDARD EQUIPMENT:
- Hydraulic Overload Protector (HOLP)
- HOLP Lower Pressure Setting Device
- Electronic Crank Angle Indicator
- Die Height Indicator (Units: 0.01 mm)
- Motorized Slide Adjustment
- Preset Stop Point Selectors
- Forced Recirculation Lubrication System
- Control Panel
- Main Operation Panel
- T-Stand, 2-Hand Operation Type, w/ Manual Step Feed Control
- Servo Driver
- MPSVC
- PLC (Programmable Logic Controller)
- HMI (Human-Machine Interface)
- Timing Switch: 4 Spare Cams
- Production Counters: Three-6-Digit Resettable Type
- Maintenance Counter: Non-Reset Type
- Data Bank: 99 Die Recipe Capacity
- Emergency Stop Button
- Die Block with Plug
- Pressure Switches (Pneumatic & Hydraulic)
- Die Protection: 2 Circuits, No Receptacles
- Air Ejector: 3/8B, 1 Set
- Air Outlet: 3/8B, 1 Set
- Instruction Manual (English Version: 1)
- Light Curtain (Front & Rear)
OPTIONAL EQUIPMENT:
- Die Cushion
- Die Lifters
- Die Clampers
- 100 V Receptacles
- 200 V Receptacles
- Isolation Mounts
- 7 channel small Die Protection
- Die Area Lighting: Spotlight Type
- Safety Guarding
- Tonnage Monitor (ALA2)
- Heating Device
- Automation Devices
- Hydraulic Slide Knockout
Specifications
| Manufacturer | AIDA |
| Model | DSF-N2-3000 |
| Condition | New |
| Tonnage Capacity | 330 U.S. Ton (3000 kN) |
| Rated Tonnage Point | 0.236 in. (6.0 mm) |
| Working Energy | 173 in-U.S. Ton (39000 J) |
| Slide Stroke Length (maximum) | 11.81 in. (300 mm) |
| SPM @ Full Stroke Length (no load) | 1 - 35 |
| Stroke Length, Fully Adjustable (no load SPM) | 50mm/2.0in. at 90 spm; 75mm/3.0in. at 78 spm; 100mm/3.9in. at 69 spm; 125mm/4.9in. at 62 spm; 150mm/5.9in. at 57 spm |
| Die Height (SDAU) | 25.59 in. (650 mm) |
| Slide Adjustment | 5.12 in. (130 mm) |
| Slide Area (LR x FB) | 94.5 x 35.4 in. (2400 x 900 mm) |
| Bolster Area (LR x FB) | 102.4 x 47.2 in. (2600 x 1200 mm) |
| Bolster Thickness | 7.9 in. (200 mm) |
| Side Opening | 48.0 x 27.2 (26.8) in. (1220 x 690 (680) mm) |
| Max. Upper Die Weight | 5071 lbs. (2300 kg) |
| Main Motor (SERVO) | 160 HP (120 kW) |
| Power Supply Capacity | 69 kVA |
| Required Air Pressure | 73 psi (0.5 MPa) |
| Foundation Bolt Position (LR x FB) | 128.3 x 65.0 in. (3260 x 1650 mm) |
| Bed Opening Dimension (LR x FB) | 94.1 x 20.5 in. (2390 x 520 mm) |
| Inside Frame Dimension | 100.4 in. (2550 mm) |
| Press Foot Top of Bolster (without mounts) | 45.3 in. (1150 mm) |
| Overall Dimension (LR x FB) | 146.7 x 132.1 in. (3725 x 3355 mm) |
| Approx. Overall Height (without mounts) | 176 in. (4460 mm) |