AIDA DSF-N2-2500
AIDA DSF-N2-2500
Location:Blairsville, GA
or
Call 937-631-6016
Description
STANDARD EQUIPMENT:
- Hydraulic Overload Protector (HOLP)
- HOLP Lower Pressure Setting Device
- Electronic Crank Angle Indicator
- Die Height Indicator (Units: 0.01 mm)
- Motorized Slide Adjustment
- Preset Stop Point Selectors
- Forced Recirculation Lubrication System
- Control Panel
- Main Operation Panel
- T-Stand, 2-Hand Operation Type, w/ Manual Step Feed Control
- Servo Driver
- MPSVC
- PLC (Programmable Logic Controller)
- HMI (Human-Machine Interface)
- Timing Switch: 4 Spare Cams
- Production Counters: Three-6-Digit Resettable Type
- Maintenance Counter: Non-Reset Type
- Data Bank: 99 Die Recipe Capacity
- Emergency Stop Button
- Die Block with Plug
- Pressure Switches (Pneumatic & Hydraulic)
- Die Protection: 2 Circuits, No Receptacles
- Air Ejector: 3/8B, 1 Set
- Air Outlet: 3/8B, 1 Set
- Instruction Manual (English Version: 1)
- Light Curtain (Front & Rear)
OPTIONAL EQUIPMENT:
- Die Cushion
- Die Lifters
- Die Clampers
- 100 V Receptacles
- 200 V Receptacles
- Isolation Mounts
- 7 channel small Die Protection
- Die Area Lighting: Spotlight Type
- Safety Guarding
- Tonnage Monitor (ALA2)
- Heating Device
- Automation Devices
- Hydraulic Slide Knockout
Specifications
| Manufacturer | AIDA |
| Model | DSF-N2-2500 |
| Condition | New |
| Tonnage Capacity | 275 U.S. Ton (2500 kN) |
| Rated Tonnage Point | 0.276 in. (7.0 mm) |
| Working Energy | 124 in-U.S. Ton (28000 J) |
| Slide Stroke Length (maximum) | 11.02 in. (280 mm) |
| SPM @ Full Stroke Length (no load) | 1 - 40 |
| Stroke Length, Fully Adjustable (no load SPM) | 50mm/2.0in. at 96 spm; 75mm/3.0in. at 84 spm; 100mm/3.9in. at 75 spm; 125mm/4.9in. at 68 spm; 150mm/5.9in. at 61 spm |
| Die Height (SDAU) | 21.65 in. (550 mm) |
| Slide Adjustment | 4.72 in. (120 mm) |
| Slide Area (LR x FB) | 82.7 x 27.6 in. (2100 x 700 mm) |
| Bolster Area (LR x FB) | 94.5 x 36.2 in. (2400 x 920 mm) |
| Bolster Thickness | 7.1 in. (180 mm) |
| Side Opening | 37.0 x 22.0 (21.7) in. (940 x 560 (550) mm) |
| Max. Upper Die Weight | 3638 lbs. (1650 kg) |
| Main Motor (SERVO) | 160 HP (120 kW) |
| Power Supply Capacity | 61 kVA |
| Required Air Pressure | 73 psi (0.5 MPa) |
| Foundation Bolt Position (LR x FB) | 115.0 x 59.1 in. (2920 x 1500 mm) |
| Bed Opening Dimension (LR x FB) | 86.6 x 18.9 in. (2200 x 480 mm) |
| Inside Frame Dimension | 99.2 in. (2520 mm) |
| Press Foot Top of Bolster (without mounts) | 43.3 in. (1100 mm) |
| Overall Dimension (LR x FB) | 128.1 x 127.8 in. (3255 x 3245 mm) |
| Approx. Overall Height (without mounts) | 163 in. (4135 mm) |