AIDA DSF-N2-1600
AIDA DSF-N2-1600
Location:Blairsville, GA
or
Call 937-631-6016
Description
STANDARD EQUIPMENT:
- Hydraulic Overload Protector (HOLP)
- HOLP Lower Pressure Setting Device
- Electronic Crank Angle Indicator
- Die Height Indicator (Units: 0.01 mm)
- Motorized Slide Adjustment
- Preset Stop Point Selectors
- Forced Recirculation Lubrication System
- Control Panel
- Main Operation Panel
- T-Stand, 2-Hand Operation Type, w/ Manual Step Feed Control
- Servo Driver
- MPSVC
- PLC (Programmable Logic Controller)
- HMI (Human-Machine Interface)
- Timing Switch: 4 Spare Cams
- Production Counters: Three-6-Digit Resettable Type
- Maintenance Counter: Non-Reset Type
- Data Bank: 99 Die Recipe Capacity
- Emergency Stop Button
- Die Block with Plug
- Pressure Switches (Pneumatic & Hydraulic)
- Die Protection: 2 Circuits, No Receptacles
- Air Ejector: 3/8B, 1 Set
- Air Outlet: 3/8B, 1 Set
- Instruction Manual (English Version: 1)
- Light Curtain (Front & Rear)
OPTIONAL EQUIPMENT:
- Die Cushion
- Die Lifters
- Die Clampers
- 100 V Receptacles
- 200 V Receptacles
- Isolation Mounts
- 7 channel small Die Protection
- Die Area Lighting: Spotlight Type
- Safety Guarding
- Tonnage Monitor (ALA2)
- Heating Device
- Automation Devices
- Hydraulic Slide Knockout
Specifications
| Manufacturer | AIDA |
| Model | DSF-N2-1600 |
| Condition | New |
| Tonnage Capacity | 176 U.S. Ton (1600 kN) |
| Rated Tonnage Point | 0.236 in. (6.0 mm) |
| Working Energy | 42 in-U.S. Ton (9600 J) |
| Slide Stroke Length (maximum) | 7.87 in. (200 mm) |
| SPM @ Full Stroke Length (no load) | 1 - 60 |
| Stroke Length, Fully Adjustable (no load SPM) | 50mm/2.0in. at 110 spm; 75mm/3.0in. at 97 spm; 100mm/3.9in. at 88 spm; 125mm/4.9in. at 78 spm |
| Die Height (SDAU) | 17.72 in. (450 mm) |
| Slide Adjustment | 3.94 in. (100 mm) |
| Slide Area (LR x FB) | 59.1 x 22.8 in. (1500 x 580 mm) |
| Bolster Area (LR x FB) | 70.9 x 29.9 in. (1800 x 760 mm) |
| Bolster Thickness | 6.5 in. (165 mm) |
| Side Opening | 30.7 x 18.9 (18.5) in. (780 x 480 (470) mm) |
| Max. Upper Die Weight | 1764 lbs. (800 kg) |
| Main Motor (SERVO) | 75 HP (55 kW) |
| Power Supply Capacity | 35 kVA |
| Required Air Pressure | 73 psi (0.5 MPa) |
| Foundation Bolt Position (LR x FB) | 89.4 x 51.2 in. (2270 x 1300 mm) |
| Bed Opening Dimension (LR x FB) | 63.0 x 15.0 in. (1600 x 380 mm) |
| Inside Frame Dimension | 75.2 in. (1910 mm) |
| Press Foot Top of Bolster (without mounts) | 35.4 in. (900 mm) |
| Overall Dimension (LR x FB) | 106.1 x 110.4 in. (2695 x 2805 mm) |
| Approx. Overall Height (without mounts) | 131 in. (3340 mm) |