AIDA DSF-N2-1100
AIDA DSF-N2-1100
Location:Blairsville, GA
or
Call 937-631-6016
Description
STANDARD EQUIPMENT:
- Hydraulic Overload Protector (HOLP)
- HOLP Lower Pressure Setting Device
- Electronic Crank Angle Indicator
- Die Height Indicator (Units: 0.01 mm)
- Motorized Slide Adjustment
- Preset Stop Point Selectors
- Forced Recirculation Lubrication System
- Control Panel
- Main Operation Panel
- T-Stand, 2-Hand Operation Type, w/ Manual Step Feed Control
- Servo Driver
- MPSVC
- PLC (Programmable Logic Controller)
- HMI (Human-Machine Interface)
- Timing Switch: 4 Spare Cams
- Production Counters: Three-6-Digit Resettable Type
- Maintenance Counter: Non-Reset Type
- Data Bank: 99 Die Recipe Capacity
- Emergency Stop Button
- Die Block with Plug
- Pressure Switches (Pneumatic & Hydraulic)
- Die Protection: 2 Circuits, No Receptacles
- Air Ejector: 3/8B, 1 Set
- Air Outlet: 3/8B, 1 Set
- Instruction Manual (English Version: 1)
- Light Curtain (Front & Rear)
OPTIONAL EQUIPMENT:
- Die Cushion
- Die Lifters
- Die Clampers
- 100 V Receptacles
- 200 V Receptacles
- Isolation Mounts
- 7 channel small Die Protection
- Die Area Lighting: Spotlight Type
- Safety Guarding
- Tonnage Monitor (ALA2)
- Heating Device
- Automation Devices
- Hydraulic Slide Knockout
Specifications
| Manufacturer | AIDA |
| Model | DSF-N2-1100 |
| Condition | New |
| Tonnage Capacity | 121 U.S. Ton (1100 kN) |
| Rated Tonnage Point | 0.197 in. (5.0 mm) |
| Working Energy | 27 in-U.S. Ton (6000 J) |
| Slide Stroke Length (maximum) | 7.09 in. (180 mm) |
| SPM @ Full Stroke Length (no load) | 1 - 70 |
| Stroke Length, Fully Adjustable (no load SPM) | 50mm/2.0in. at 115 spm; 75mm/3.0in. at 100 spm; 100mm/3.9in. at 90 spm; 125mm/4.9in. at 80 spm |
| Die Height (SDAU) | 15.75 in. (400 mm) |
| Slide Adjustment | 3.54 in. (90 mm) |
| Slide Area (LR x FB) | 53.5 x 20.5 in. (1360 x 520 mm) |
| Bolster Area (LR x FB) | 65.4 x 26.8 in. (1660 x 680 mm) |
| Bolster Thickness | 6.1 in. (155 mm) |
| Side Opening | 27.6 x 17.3 (16.9) in. (700 x 440 (430) mm) |
| Max. Upper Die Weight | 1213 lbs. (550 kg) |
| Main Motor (SERVO) | 55 HP (40 kW) |
| Power Supply Capacity | 26 kVA |
| Required Air Pressure | 73 psi (0.5 MPa) |
| Foundation Bolt Position (LR x FB) | 82.3 x 47.2 in. (2090 x 1200 mm) |
| Bed Opening Dimension (LR x FB) | 58.3 x 13.8 in. (1480 x 350 mm) |
| Inside Frame Dimension | 68.1 in. (1730 mm) |
| Press Foot Top of Bolster (without mounts) | 35.4 in. (900 mm) |
| Overall Dimension (LR x FB) | 99.0 x 102.6 in. (2515 x 2605 mm) |
| Approx. Overall Height (without mounts) | 121 in. (3080 mm) |