AIDA DSF-N1-2000
AIDA DSF-N1-2000
Location:Blairsville, GA
or
Call 937-631-6016
Description
STANDARD EQUIPMENT:
- Hydraulic Overload Protector (HOLP)
- HOLP Lower Pressure Setting Device
- Electronic Crank Angle Indicator
- Die Height Indicator (Units: 0.01 mm)
- Motorized Slide Adjustment
- Preset Stop Point Selectors
- Forced Recirculation Lubrication System
- Control Panel
- Main Operation Panel
- T-Stand, 2-Hand Operation Type, w/ Manual Step Feed Control
- Servo Driver
- MPSVC
- PLC (Programmable Logic Controller)
- HMI (Human-Machine Interface)
- Timing Switch: 4 Spare Cams
- Production Counters: Three-6-Digit Resettable Type
- Maintenance Counter: Non-Reset Type
- Data Bank: 99 Die Recipe Capacity
- Emergency Stop Button
- Die Block with Plug
- Pressure Switches (Pneumatic & Hydraulic)
- Die Protection: 2 Circuits, No Receptacles
- Air Ejector: 3/8B, 1 Set
- Air Outlet: 3/8B, 1 Set
- Instruction Manual (English Version: 1)
- Light Curtain (Front & Rear)
- Rear Cover
OPTIONAL EQUIPMENT:
- Die Cushion
- Die Lifters
- Die Clampers
- 100 V Receptacles
- 200 V Receptacles
- Isolation Mounts
- 7 channel small Die Protection
- Die Area Lighting: Spotlight Type
- Safety Guarding
- Tonnage Monitor (ALA2)
- Heating Device
- Automation Devices
- Hydraulic Slide Knockout
Specifications
| Manufacturer | AIDA |
| Model | DSF-N1-2000 |
| Condition | New |
| Tonnage Capacity | 220 U.S. Ton (2000 kN) |
| Rated Tonnage Point | 0.236 in. (6.0 mm) |
| Working Energy | 58 in-U.S. Ton (13100 J) |
| Slide Stroke Length (maximum) | 9.84 in. (250 mm) |
| SPM @ Full Stroke Length (no load) | 1 - 50 |
| Stroke Length, Fully Adjustable (no load SPM) | 50mm/2.0in. at 108 spm; 75mm/3.0in. at 95 spm; 100mm/3.9in. at 85 spm; 125mm/4.9in. at 75 spm |
| Die Height (SDAU) | 17.72 in. (450 mm) |
| Slide Adjustment | 4.33 in. (110 mm) |
| Slide Area (LR x FB) | 39.4 x 25.6 in. (1000 x 650 mm) |
| Bolster Area (LR x FB) | 49.2 x 33.1 in. (1250 x 840 mm) |
| Bolster Thickness | 7.1 in. (180 mm) |
| Side Opening | 24.4 x 16.5 (14.6) in. (620 x 420 (370) mm) |
| Max. Upper Die Weight | 2205 lbs. (1000 kg) |
| Main Motor (SERVO) | 160 HP (120 kW) |
| Power Supply Capacity | 35 kVA |
| Required Air Pressure | 73 psi (0.5 MPa) |
| Foundation Bolt Position (LR x FB) | 65.2 x 62.6 in. (1655 x 1590 mm) |
| Bed Opening Dimension (LR x FB) | 57.1 x 18.1 in. (1450 x 460 mm) |
| Inside Frame Dimension | 51.2 in. (1300 mm) |
| Press Foot to Top of Bolster (without mounts) | 39.4 in. (1000 mm) |
| Overall Dimension (LR x FB) | 78.9 x 85.6 in. (2005 x 2175 mm) |
| Approx. Overall Height (without mounts) | 149 in. (3795 mm) |