AIDA NS2-3000-1
AIDA NS2-3000-1
Location:Blairsville, GA
or
Call 937-631-6016
Description
- Hydraulic Overload Protector
- Emergency Stop Button
- Motorized Slide Adjustment Device
- Forced Circulation Lubrication System
- Mode Selection (Inch, Off, Single, Continuous)
- Die Height Indicator (0.01mm Digital Display)
- T-Stand Run Station
- Side Opening Covers
- Air Ejector (3/8B x 1; 3-Way Valve)
- Air Outlet (3/8B x 1)
- Rear Guard
- Multiprocessor Controller (MPC)
- HOLP Lower Pressure Setting Equipment
- Clutch and Brake Solenoid Valve; with Monitor
- OSHA and ANSI Compliant
- Maintenance Counter (8-digit x 1)
- Main Motor (Inverter Drive)
- Preset Counter (6-Digit x 3)
- Recipe Data Bank (20 Recipes)
- Timing Switch (4 Spare Channels)
- Crank Angle Indicator (Digital Display)
- Overrun Monitor
- Hour Meter (6-Digit x 1)
- Instruction Manual (English: 1 set)
- Flywheel Brake
- Die Protection Receptacles (2 Circuits)
- Main Circuit Fuseless Breakers
- Adjustable Safety Die Block(s)
- Main Motor Reversing Device
Specifications
| Manufacturer | AIDA |
| Model | NS2-3000-1 |
| Condition | New |
| Stroke Length | 7.87 in. (200 mm) |
| SPM (No Load) | 20~50 min-1 |
| Die Height, Slide to Bolster | 23.62 in. (600 mm) |
| Tonnage Capacity | 330 U.S. ton (3000 kN) |
| Rated Tonnage Point (Above BDC) | 0.23 in. (6.0 mm) |
| Slide Adjustment | 5.12 in. (130 mm) |
| Slide Area (LR x FB) | 94.50 x 35.40 in. (2400 x 900 mm) |
| Bolster Area (LR x FB) | 102.40 x 47.20 in. (2600 x 1200 mm) |
| Bolster Thickness | 7.90 in. (200 mm) |
| Maximum Upper Die Weight | 5071 lb. (2300 kg) |
| Main Motor | 50 HP (37 kW) |
| Required Air Pressure | 73 psi (0.5 MPa) |
| Side Opening (W x H) | 48.0 x 20.9 in. (1220 x 530 mm) |