AIDA NS1-1500-S
AIDA NS1-1500-S
Location:Blairsville, GA
or
Call 937-631-6016
Description
- Hydraulic Overload Protector
- Emergency Stop Button
- Motorized Slide Adjustment Device
- Forced Circulation Lubrication System
- Mode Selection (Inch, Off, Single, Continuous)
- Die Height Indicator (0.01mm Digital Display)
- T-Stand Run Station
- Side Opening Covers
- Air Ejector (3/8B x 1; 3-Way Valve)
- Air Outlet (3/8B x 1)
- Rear Guard
- Multiprocessor Controller (MPC)
- HOLP Lower Pressure Setting Equipment
- Clutch and Brake Solenoid Valve; with Monitor
- OSHA and ANSI Compliant
- Maintenance Counter (8-digit x 1)
- Main Motor (Inverter Drive)
- Preset Counter (6-Digit x 3)
- Recipe Data Bank (20 Recipes)
- Timing Switch (4 Spare Channels)
- Crank Angle Indicator (Digital Display)
- Overrun Monitor
- Hour Meter (6-Digit x 1)
- Instruction Manual (English: 1 set)
- Flywheel Brake
- Die Protection Receptacles (2 Circuits)
- Main Circuit Fuseless Breakers
- Adjustable Safety Die Block(s)
- Main Motor Reversing Device
Specifications
| Manufacturer | AIDA |
| Model | NS1-1500-S |
| Condition | New |
| Tonnage Rating Point | 0.16 in. (4.0 mm) |
| Stroke Length | 3.15 in. (80 mm) |
| Continuous SPM (No Load) | 55~115 min-1 |
| Nominal Capacity | 165 U.S. ton (1500 kN) |
| Die Height | 13.78 in. (350 mm) |
| Slide Adjustment Range | 3.94 in. (100 mm) |
| Slide Area (LR x FB) | 35.43 x 22.83 in. (900 x 580 mm) |
| Bolster Area (LR x FB) | 45.28 x 23.62 in. (1150 x 600 mm) |
| Side Opening (from top of bolster) | 22.05 x 11.02 in. (560 x 280 mm) |
| Bolster Thickness | 6.50 in. (165 mm) |
| Maximum Upper Die Weight | 1100 lb. (500 kg) |
| Main Motor (Variable) | 15 HP (11 kW) |
| Required Air Pressure | 73 psi (0.5 MPa) |