AIDA NC2-2000-1
AIDA NC2-2000-1
Location:Blairsville, GA
or
Call 937-631-6016
Description
- Highly rigid fabricated steel frame with low angular deflection
- Cast iron slide
- Cast bolster plate
- Forged steel crankshaft
- Hardened & ground pinion & ground main gear
- 6-Point full length bronze gibs
- Automatic lubrication system for gibs & crankshaft bearings
- Clutch-brake control through AIDA proprietary microprocessor
- Wet type clutch & brake
- Automatic flywheel brake with actuation valve
- Brake stop-time monitoring display
- Hydraulic overload protection (HOLP)
- Stuck-on-bottom release device
- Variable speed main motor with reversing capability
- PLC control with operator touch screen for functionality
- Main control panel on outside frame (right side)
- Operation push button pedestal, T-stand
- Air counterbalance cylinder
- Motor-driven die height adjustment
- Metric die height indicator
- Programmable limit switch, four (4) PLS outputs for customer use
- Die protection receptacle, two (2)
Specifications
| Manufacturer | AIDA |
| Model | NC2-2000-1 |
| Condition | New |
| Tonnage Capacity | 220 U.S. ton (2000 kN) |
| Tonnage Rating Point | 0.3 in. (7.0 mm) |
| Slide Adjustment | 4.3 in. (110 mm) |
| Slide Area (LR x FB) | 72.8 x 25.6 in. (1850 x 650 mm) |
| Inside Frame Dimension | 75.6 in. (1920 mm) |
| Bolster Thickness | 6.7 in. (170 mm) |
| Maximum Upper Die Weight | 2646 lb. (1200 kg) |
| Main Motor Capacity | 30 HP (22 kW) |
| Required Air Pressure | 73 psi (0.5 MPa) |
| Full Stroke Length | 5.9 in. (150 mm) |
| SPM (No Load) | 40~80 spm |
| Die Height (SDAU) | 17.72 in. (450 mm) |
| Bolster Area (LR x FB) | 95.3 x 26.8 in. (2420 x 680 mm) |
| Throat Depth | 13.8 in. (350 mm) |