AIDA NC2-2500-2
AIDA NC2-2500-2
Location:Blairsville, GA
or
Call 937-631-6016
Description
- Highly rigid fabricated steel frame with low angular deflection
- Cast iron slide
- Cast bolster plate
- Forged steel crankshaft
- Hardened & ground pinion & ground main gear
- 6-Point full length bronze gibs
- Automatic lubrication system for gibs & crankshaft bearings
- Clutch-brake control through AIDA proprietary microprocessor
- Wet type clutch & brake
- Automatic flywheel brake with actuation valve
- Brake stop-time monitoring display
- Hydraulic overload protection (HOLP)
- Stuck-on-bottom release device
- Variable speed main motor with reversing capability
- PLC control with operator touch screen for functionality
- Main control panel on outside frame (right side)
- Operation push button pedestal, T-stand
- Air counterbalance cylinder
- Motor-driven die height adjustment
- Metric die height indicator
- Programmable limit switch, four (4) PLS outputs for customer use
- Die protection receptacle, two (2)
Specifications
| Manufacturer | AIDA |
| Model | NC2-2500-2 |
| Condition | New |
| Tonnage Capacity | 275 U.S. ton (2500 kN) |
| Tonnage Rating Point | 0.3 in. (7.0 mm) |
| Slide Adjustment | 4.7 in. (120 mm) |
| Slide Area (LR x FB) | 82.7 x 27.6 in. (2100 x 700 mm) |
| Inside Frame Dimension | 86.2 in. (2190 mm) |
| Bolster Thickness | 7.1 in. (180 mm) |
| Maximum Upper Die Weight | 3638 lb. (1650 kg) |
| Main Motor Capacity | 40 HP (30 kW) |
| Required Air Pressure | 73 psi (0.5 MPa) |
| Full Stroke Length | 11.0 in. (280 mm) |
| SPM (No Load) | 20~40 spm |
| Die Height (SDAU) | 21.65 in. (550 mm) |
| Bolster Area (LR x FB) | 106.3 x 36.2 in. (2700 x 920 mm) |
| Throat Depth | 18.5 in. (470 mm) |