AIDA NC1-450-2
AIDA NC1-450-2
Location:Blairsville, GA
or
Call 937-631-6016
Description
- Highly rigid fabricated steel frame with low angular deflection
- Cast iron slide
- Cast bolster plate
- Forged steel crankshaft
- Hardened & ground pinion & ground main gear
- 6-Point full length bronze gibs
- Automatic lubrication system for gibs & crankshaft bearings
- Clutch-brake control through AIDA proprietary microprocessor
- Wet type clutch & brake
- Automatic flywheel brake with actuation valve
- Brake stop-time monitoring display
- Hydraulic overload protection (HOLP)
- Stuck-on-bottom release device
- Variable speed main motor with reversing capability
- PLC control with operator touch screen for functionality
- Main control panel on outside frame (right side)
- Operation push button pedestal, T-stand
- Air counterbalance cylinder
- Motor-driven die height adjustment
- Metric die height indicator
- Programmable limit switch, four (4) PLS outputs for customer use
- Die protection receptacle, two (2)
Specifications
| Manufacturer | AIDA |
| Model | NC1-450-2 |
| Condition | New |
| Tonnage Capacity | 50 U.S. ton (450 kN) |
| Tonnage Rating Point | 0.1 in. (3.2 mm) |
| Slide Adjustment | 2.3 in. (60 mm) |
| Slide Area (LR x FB) | 16.1 x 13.4 in. (410 x 340 mm) |
| Inside Frame Dimension | 19.6 in. (499 mm) |
| Bolster Thickness | 4.3 in. (110 mm) |
| Maximum Upper Die Weight | 551 lb. (250 kg) |
| Main Motor Capacity | 7 HP (5.5 kW) |
| Required Air Pressure | 73 psi (0.5 MPa) |
| Full Stroke Length | 4.7 in. (120 mm) |
| SPM (No Load) | 50~105 spm |
| Die Height (SDAU) | 10.63 in. (270 mm) |
| Bolster Area (LR x FB) | 31.9 x 17.3 in. (810 x 440 mm) |
| Throat Depth | 8.9 in. (225 mm) |