AIDA NC1-350-2
AIDA NC1-350-2
Location:Blairsville, GA
or
Call 937-631-6016
Description
- Highly rigid fabricated steel frame with low angular deflection
- Cast iron slide
- Cast bolster plate
- Forged steel crankshaft
- Hardened & ground pinion & ground main gear
- 6-Point full length bronze gibs
- Automatic lubrication system for gibs & crankshaft bearings
- Clutch-brake control through AIDA proprietary microprocessor
- Wet type clutch & brake
- Automatic flywheel brake with actuation valve
- Brake stop-time monitoring display
- Hydraulic overload protection (HOLP)
- Stuck-on-bottom release device
- Variable speed main motor with reversing capability
- PLC control with operator touch screen for functionality
- Main control panel on outside frame (right side)
- Operation push button pedestal, T-stand
- Air counterbalance cylinder
- Motor-driven die height adjustment
- Metric die height indicator
- Programmable limit switch, four (4) PLS outputs for customer use
- Die protection receptacle, two (2)
Specifications
| Manufacturer | AIDA |
| Model | NC1-350-2 |
| Condition | New |
| Tonnage Capacity | 39 U.S. ton (350 kN) |
| Tonnage Rating Point | 0.1 in. (2.6 mm) |
| Slide Adjustment | 2.0 in. (50 mm) |
| Slide Area (LR x FB) | 15.0 x 11.8 in. (380 x 300 mm) |
| Inside Frame Dimension | 18.0 in. (458 mm) |
| Bolster Thickness | 3.9 in. (100 mm) |
| Maximum Upper Die Weight | 397 lb. (180 kg) |
| Main Motor Capacity | 7 HP (5.5 kW) |
| Required Air Pressure | 73 psi (0.5 MPa) |
| Full Stroke Length | 4.7 in. (120 mm) |
| SPM (No Load) | 55~115 spm |
| Die Height (SDAU) | 9.84 in. (250 mm) |
| Bolster Area (LR x FB) | 28.7 x 15.0 in. (730 x 380 mm) |
| Throat Depth | 7.7 in. (195 mm) |