Double-T clamping bar DW 22/300 with rollers

double acting
with carrying rollers for lifting and clampingDouble-T clamping bar, double acting, with carrying rollers for lifting and clamping

Preferably for use in the press bed. Installation and function as described above, however equipped with carrying rollers.
A double-acting piston causes the lifting of the carrying rollers and the following clamping of the die by a second clamping circuit. Before clamping is made, the die positioned on the carrying rollers is not in contact with the table plate and can be easily moved and positioned.
Lifting, moving, positioning and clamping with one element only. 

Segmental design

All double-T bars are composed of modular segments.
Thus different lengths can be delivered.

Overlap

The double-T clamping bars are composed of individual segments.
When clamping or unclamping, make sure that there is an overlap of >50% of the segment length.
Segment length:
T-slot 18 = 150 mm
T-slot 22 = 300 mm
T-slot 28 = 300 mm

Special versions

stroke reduction, intermediate lengths and extra-long bars are available on request.

Applications

For clamping of dies on the press bed and press ram in confined space.

Special features

max. operating pressure 400 bar, thus no low-pressure circuit required

the complete clamping surface can be used

no collision edges

easy and quick retrofit

ideal, uniform force transmission

Application example 1

Double-T clamping bar on press bed and ram

Double-T clamping bar DW 22/300 with rollerswith carrying rollers for lifting and clamping*as per catalogue sheet WZ 2.1832