Drum Motor Conveyor

The Pax Model DMC “Drum Motor” Conveyor is designed for removing parts and scrap from dies. This low-maintenance conveyor utilizes a geared motor hermetically sealed inside a steel cylindrical tube. This technology eliminates the need for chains, sprockets, and external motors. Pax Drum Motor Conveyors, (“DMCs”) are rugged, high-capacity, low-maintenance conveyors that utilize motorized pulley design, which eliminates the need for external motors, chains, and sprockets. Widths up to 72” Low Profile Designs Available Speeds over 250 fpm Available Options for Cantilevered & Powered Lift and Positioning Highly customizable 2 Ply Mono-Filament, Urethane belt This is the standard belt for the CD conveyor. This smooth, white belt is oil resistant and is comprised of 2 layers of clear polyurethane and 2 layers of urethane-coated polyester material, which combine for a total thickness of 1.8 mm. This belt is connected with stainless steel lacing and a pin. Custom Belts Contact Pax in regards to endless belts or belts made from alternate materials. Standard Speed: 20 to 80 fpm Max. Avail. Speed: Over 250 fpm Belt Widths: 12.5” to 72” Max. Belt Length: 13’ to 20’ depending on conveyor configuration The below, interactive drawing can be utilized to determine the approximate dimensions of a conveyor that has a 2.5” tension pulley but does not have any options (side rails, stands, etc.). Type in the desired belt width and belt length and the other dimensions will change accordingly.