Push-Pull Servo Feed Used extensively for Gasket, Foil, Fabric, Teflon and other limp, delicate material.

Both Servo Feeds are synchronized by a single control with proprietary new software. Pushing the material into position and simultaneously pulling the strip or skeleton away from the tool provides better control and eliminates buckling.

The Push-Pull can be manufactured using any model of P/A Feed - from the Micro to the Maximus, even Wire Feeds and Profiled Parts Feeds.

This system can be used for non-coil strip feeding and can increase piece part production by as much as 400% vs. many strip feed applications.

Specifications

Manufacturer	P/A Industries
Model	SRFD 20
Condition	New
Feed Roll Diameter (in.)	3.55
Max Roll Opening (in.)	.138
Max Thickness at Full Width (in.) / (in.)	.105/19.68
Pulling Power Peak/Cont. (Lbs.)	584/201
AC Power Input VAC/Ph/Hz/Amps	230/1/50/36
Feed Roll Diameter (mm)	90
Max Roll Opening (mm)	3,5
Max Thickness at Full Width (mm) / (mm)	2,67/500
Pulling Power Peak/Cont. (N)	2600/895