PAX EGD-50

Optional, Quick Release Arm Arrangement: To provide increased access to the press, this quick-release option allows the operator to simply lift the arm, (crossbar), off of the unit and to re-install the arm by simply placing it back on the top of the unit. No tools are required to remove or replace the arm. T- Slot Type Mounting Brackets: Bracket bolts to the bottom of the EGD-50 and is arranged to attach to standard T-slots. Standard brackets are based on a vertical mounting surface of 5.25”, (this is the height of the vertical plate on the bracket). Brackets are available for different T-slot sizes and spacing as shown below, (contact Pax for detailed dimensions of the required bracket). EGD-050-6190-0: ¾” T-Slots on 6” spacing, bar widths of A = 0.72” and B = 1.38″. EGD-050-6192-0: ¾” T-Slots on 12” spacing, bar widths of A = 0.72” and B = 1.38”. EGD-050-6191-0: 1” T-Slots on 6” spacing, bar widths of A = 0.97” and B = 1.50”. EGD-050-6193-0: 1” T-Slots on 12” spacing, bar widths of A = 0.97” and B = 1.50”. Vertical Face Mounting Bracket (PN EGD-050-6194-0): The bracket bolts to the bottom of the EGD-50 and is arranged to be bolted to a vertical surface (such as the face of a bolster plate). Standard brackets are based on a vertical mounting surface of 5.25”, (this is the height of the vertical plate on the bracket). Contact Pax for detailed dimensions. Option of Utilizing an Extruded Aluminum Cross Bar in Place of Pax’s Standard Cross Bar: For customers who have standardized extruded aluminum type cross bars, an extruded aluminum bar can be attached directly to the top plate on the EGD-50. To attach the extruded aluminum bar, four ¼” bolts can be inserted through existing holes in the top plate and connected to T-nuts that can be inserted into the extruded aluminum bar. Top plate is designed for a 1.5” x 3” extrusion that has a 1.5” spacing between T-slots and a T-slot opening of 0.32”.